Fundamental characteristics of rubber sheet

When rubber products are formed, they are limited by high pressure, and the internal cohesion of the elastic body cannot be cancelled. During the molding process, there is usually an extremely unstable shrinkage (the shrinkage rate of rubber varies depending on the type of rubber). It is only after a period of time to abide by the contract that they can be stabilized. So, at the beginning of the design of a rubber product, whether it is the mold or not, careful calculation and coordination are necessary. If not, it is easy to cause instability in the scale of the finished product, resulting in a loss of quality and quantity.

2. Rubber belongs to the category of thermosetting elastomers, while plastics belong to the category of thermosetting elastomers. Due to the different types of sulfides in rubber, there are also appropriate differences in the temperature scale of its molding and curing, and it can even be affected by climate changes and indoor temperature and humidity. Therefore, the production conditions of rubber products need to be adjusted appropriately at any time. If not, differences in quality and quantity may also occur.